The manufacturer of Porsche Cayenne D1453 brake pads tells you that the Cayenne is a hot-selling model of Porsche. To replace its Porsche Cayenne D1453 brake pads, you must first prepare the relevant tools, then remove the tires and stand the piston. The brake pads can be replaced after removing the caliper.

The tools for replacing the Porsche Cayenne D1453 brake pads are new brake pads, a special tool for the top brake cylinder piston, a 7MM Allen key for caliper removal, and a labor-saving wrench for tire removal. And note that before disassembling the tires, two bricks should be used to fix one of the other three tires. In addition, after the caliper is removed, a bench should be used to light it up, because it is tied to the brake hose, so you must be very careful. After changing it, you should try it slowly to see if it can be used. Generally, it takes a running-in period of 200 kilometers.
Porsche Cayenne D1453 brake pads replacement steps:
1. First remove the wheel, reset the brake cylinder, it is best to have special tools, if not, you can use a screwdriver;
2. Then remove the cylinder fixing bolts, remove the old brake pads, install the new brake pads, install the cylinder fixing bolts and tighten them, and install the wheels;
3. After all the brake pads are replaced, start the vehicle and step on the brake pedal several times to make the brake pedal have a certain strength;
4. Finally, it is necessary to check whether the brake oil level is within the standard scale line. If the oil level is lower than the standard, it needs to be added. The new Porsche Cayenne D1453 brake pads should be used for 300--500 kilometers to achieve the best effect.