NEWS CENTER
Professional brake system solutions
What are the precautions for EUROPEAN TRUCK BRAKE PAD summer maintenance
- Categories:Industry
- Author:
- Origin:
- Time of issue:2022-09-16 15:39
- Views:
(Summary description)EUROPEAN TRUCK BRAKE PAD manufacturers tell you that due to the high temperature in summer, the brake pads are subjected to greater pressure during use and are more prone to wear.
What are the precautions for EUROPEAN TRUCK BRAKE PAD summer maintenance
(Summary description)EUROPEAN TRUCK BRAKE PAD manufacturers tell you that due to the high temperature in summer, the brake pads are subjected to greater pressure during use and are more prone to wear.
- Categories:Industry
- Author:
- Origin:
- Time of issue:2022-09-16 15:39
- Views:
EUROPEAN TRUCK BRAKE PAD manufacturers tell you that due to the high temperature in summer, the brake pads are subjected to greater pressure during use and are more prone to wear. So, what are the precautions for summer maintenance of EUROPEAN TRUCK BRAKE PAD?
During the rainy season, the road surface is wet, and it is easy to reduce the friction coefficient between the tire and the road surface, especially when there is water accumulation on the tire tread, the friction coefficient is lower. Therefore, in addition to checking the brake system regularly, it is time to replace the friction pad when the thickness of the friction pad drops below 4mm. For the wear of EUROPEAN TRUCK BRAKE PAD, you don't need to remove the tires, just adjust the light and look inside the wheel hub to see the wear of the brake pads. Generally speaking, the average life of brake pads is about 35,000 kilometers.
From today, it has entered the dog days, hot summer, in addition to maintaining the brake pads, you also need to pay attention to the maintenance of other components to help the car pass the summer safely. Other things to note are:
1. Learn to cool the engine
The engine runs at high temperatures, and once you climb a hill, the water temperature rises quickly. At this time, many card friends are used to pouring cold water directly on the engine to cool down, which is not appropriate. Because the car engine works normally only when the temperature is at 90°C, and with the combustion of fuel, the engine temperature continues to rise. If the water is used for cooling, the water is easy to open, and the engine cannot continue to work. The correct cooling posture is to use coolant, because the high boiling point of coolant can ensure the normal operation of the engine. However, when the engine is short of water and there is no coolant around, pure water can be used as an emergency.
2. Prevent tire blowout
The standard tire pressure of tires is about 2.2~2.6bar. In summer, the temperature is high, and the temperature of truck tires increases as the temperature of truck tires increases. Too high tire pressure will easily increase tire wear and may cause tire blowout, while too low tire pressure will increase fuel consumption and vehicle damage. Bumpy feeling. In order to cool the tires, some people sprinkle water on the high-temperature tires to cool down. This method is easy to cause cracks in the tires and shorten the service life of the tires. The manufacturer of EUROPEAN TRUCK BRAKE PAD tells you that the correct method is to check the tire pressure at any time while driving. If the tire is overheated and the air pressure is too high, the car should be parked in a cool place to cool down. Flat tires on the way and early damage to tires.
3. Other maintenance details that need attention
It is rainy in summer, and the rain has a strong corrosive effect on the paint surface of the car. It is best to give the car a paint beauty after the rain. At the same time, the car may have electricity leakage due to the wet ignition system in rainy days. The manufacturer of EUROPEAN TRUCK BRAKE PAD tells you to use a dry paper towel or dry cloth to dry the inside and outside of the distribution board and the wires, etc., and then spray the desiccant on the distribution board. Disk cover, battery connector, spark plug, high-voltage wire and ignition coil, etc., wait for a while to start the engine. In addition, the maintenance and inspection of the wiper should also be carefully in place.
Professional brake system solutions
Mail:sharonbrake@163.com
Fax:0318-5336012