Tiida D1592 brake pads can be used for 3 years or 40,000 to 60,000 kilometers. However, according to different driving habits and usage conditions, the wear of the brake pads is also different. The same car needs to be replaced for 30,000 to 40,000 kilometers. Because the road conditions are relatively smooth and the driver's skills are better, the car does not need to be replaced for hundreds of thousands of kilometers.

The original Tiida D1592 brake pads are produced by the original factory, and the brake discs of this model are suitable for special brake pad brands. The price quoted by the 4S shop is 700 including working hours, but buying other well-known brand brake pads is about 300-400 yuan, but it cannot be installed in 4S. If you buy a brand-name brake pad, the price is about 200 to 300 yuan. It is recommended to use big brand brake pads such as Bosch and Ferodo.
Tiida D1592 brake pads are generally composed of steel plates, adhesive insulation layers and friction blocks. The steel plates are coated to prevent rust. During the coating process, the SMT-4 furnace temperature tracker is used to detect the temperature distribution of the coating process to ensure the quality. The thermal insulation layer is composed of materials that do not transfer heat, and the purpose is to insulate.
The friction block is composed of friction material and adhesive. When braking, it is squeezed on the brake disc or brake drum to generate friction, so as to achieve the purpose of vehicle deceleration and braking. Due to friction, the friction pads will gradually wear out, and generally the lower cost Tiida D1592 brake pads will wear out faster.